A floor jack primary purpose is to lift cars, small pickups, SUV’s and RV’s and they are designed to lift different weights according to the purpose that a person would like to use them. They are designed to roll under the car and with a handle pump it up hydraulically until the wheel has lifted or to the height that a mechanic would like to do some repair work or simply to change the tire of the vehicle. There are times with low profile vehicles one will also need a low profile floor jack to get underneath the car or truck. Floor jacks are essential where there are lots of vehicles and a workshop is necessary.
Floor Jacks are designed to lift your vehicle with ease and to achieve this it needs to fit well under the vehicles that you are intending to use it for and have enough lift to ensure that the tire that is fitted on your vehicle can be taken off with enough clearance below.
- Make sure that the floor jack will fit underneath the vehicle but at the same time, it should not have too much clearance. If there is too much clearance then half the jacks lifting capacity could be used before it starts lifting the car.
- The safety features that it has especially if you are thinking of doing repairs at the bottom of the car and thinking of using the jack for the vehicle to rest on
- The size and storage of the Jack when it is not in use especially if it is going to be used for home use and will be stored in a garage.
- The lifting saddle and if it will be suitable for the type of vehicles that it will be required for
- The price and the construction of the floor jack.
The Blackhawk fast lift service jack is rated at 3.5 ton with a bypass valve to avoid over pumping. It is sturdily built with rolled side frames which add strength, rigidity and prevents the lifting arm from twisting. The steel is heavy duty and the jack’s total weight is 85lbs and for storing purposes the handle can be detached from the jack. The lift of the jack is 22 inches with a fitted swivel saddle for easy positioning and user safety. It features a bypass device so that no damage can be done to the hydraulics by over pumping and It is fitted with a safety valve and internal vent plug for safe operation.
The jack has a quick lifting action and only takes about 3 to 4 pumps to reach the maximum height and the jack returns to its original position when the oil is released. The Blackhawk has good capabilities with a good price at of under $150,00.
Pro-Lift F-767 Grey Low Profile Floor Jack
The Pro-Lift F-767 is a low profile floor jack with a lifting range of 3,5 inches to 14 inches with a lifting capacity of 2 tons. It is perfect for the low profile car and it only weighs 30 lbs which is ideal for any home that has low profile vehicles. The handle is fitted into the jack with a simple twist but care must be taken when pumping because if the jack handles twists it will come loose. The handle is short so the jack takes a little longer to reach the 14 inches but does the job. The Pro-Lift is a good design for home use where it will be used occasionally but it is not recommended for daily use like in a workshop.
It has all the safety valves to ensure that it will not be over pumped but the saddle is on the small side and the jack is also not stable enough so not recommended to lift the car in the middle but to do one wheel at a time. According to the floor jack reviews, it is more suited as travel jack but for the price is well worth considering if you have a low profile vehicle.
Hein-Werner HW93642 Hydraulic Service Jack
The Hein-Weiner is the best floor jack with a 2 ton capacity for workshop use. The jack is made from cast iron and both the lifting arm and the base are supported by side flange plates which provide stability and strength under load. It has an in-line pump assembly for a longer life and there is no chance of off – centre forces reducing wear. The release mechanism is a U-joint and allows for precise load control. The hydraulic pump is built in, for added protection which ensures a long working life. Hein-Werner has designed this 2-ton jack with safety in mind which is fitted with a 6 3/4 inch saddle diameter and with a wider base of 11 3/4 inch will ensure that vehicle is lifted in the most stable way.
The Hein-Werner Hydraulic Service Jack is on the expensive side but it will last you a lifetime and it has repair kits if a part should break or become faulty. The reviews are good with some customers commenting that their jack has lasted 40 years and well worth the money spent.
Neiko Pro 20272B Premium Low Profile Aluminum Floor Jack
The jack is well constructed and efficient with it only needing about 5 pumps to reach its maximum height rates it as one of the top 3 tons jacks. The Neiko Pro is sold at under $270,00 and good value for money.
Torin T83006 SUV Service Jack
The Torin T83006 is a small jack with the capacity to lift 3 tons with a lifting range from 5 7/8 inch to 20 7/8 inch and is the perfect jack for doing it yourself repair work or for roadside work. It only weighs 46.4 pounds and it is supplied with an SUV extender so that it can be used to lift higher off the ground vehicles such as SUVs and small trucks. It comes with swivel easy gliding wheels making it easy to position at the required spot. The Torin Service Jack is made from high strength steel and fitted with a nodular cast iron pump which will lift large loads safely. The Torin jack is factory tested and complies with the ASME standards
With the Torin T83006 being compact in design it is easy to store and keep in the vehicle in case it is required for roadside use. The Torin T83006 is a good floor jack and sold at a very competitive price if you would like to purchase a floor jack.
Performance Tool W1627 3.5 Tonne Low Profile Service Jack
This is a good jack to have in the workshop for low profile vehicles. The lifting range is from 4 inches to 20 1/2 inch. The Performance Tool Jack lifting capacity is rated at 3,5 tons, is made from high-quality steel with all the safety valves such as the load overload bypass allowing you to use this jack with confidence. The swivel saddle is fitted with a rubber pad ensuring that you do not damage the bodywork of the vehicle. It also has an extra long frame and designed for maximum stability with swivel wheels at the back for easy positioning and maneuverability. The W1627 is built to last and for the professional or home use.
It is supplied with a two piece handle for sure grip, equipped with foam bumper to prevent damage to the vehicle and fitted with a double pump mechanism for quick lifting. It has a carry case and if need be can fit comfortably in the trunk of a car and with its great performance is well considering
JEGS Performance Products 80006 Professional Low-Profile Aluminum Floor Jack
The Jegs low profile jack only weighs 49 pounds and is a 2-ton low profile floor jack with a lifting range from 3.5 inches to 15 3/4 inch and fitted with a saddle that rotates 360 degrees. It is supplied with a two piece handle which has a protection sleeve so that it does not damage the vehicle. It comes with dual side grip handles for easy positioning and maneuvering. The dimensions are chassis length is 26,5″, width is 13″ and is the best low profile jack for personal use. Even though the jack is designed for low profile vehicles it has enough lifting capacity to lift higher vehicles such pickups or if the vehicle has a lot of suspension travel
The Jegs Performance low profile floor jack is light, compact and easy to transport from job to job if you are a professional. The great feature about the jack is that it has wide wheels and easy to roll over gravel. This is not a cheap jack but at under $200,00 well worth considering.
Arcan ALJ3T Aluminum Floor Jack
If you would like a 3-ton aluminum jack the Arcan ALJ3T will be a good choice. It is manufactured with thick frame side plates and a reinforced lifting arm for added strength, chassis torsion control, and durability. It has a fast rising action with its dual pump pistons which have dust prevention shields fitted to prevent dust damage. The overload valves prevent damage to the piston being overextended or damaged from lifting overweight vehicles. The handle is a two piece for easy storage with a quick lock engagement for the two halves of the handle.
The jack is designed to fit under low profile vehicles with the minimum range being only 3 3/4 inch and maximum height 18 1/4 inch enabling it to lift cars, pickups, and SUV’s. It is a perfect jack for home use because it is light and easy to store. With a very competitive price, this jack is a good buy.
Arcan XL2T Black Low Profile Steel Service Jack
The Arcan XL2T is the best 2-ton low profile floor jack and has a lifting range from 2 3/4 inches to 24 inches. It is designed for maximum stability with its extra long body of 32 inches and is constructed from steel capable of taking on any job for weekend mechanics or the professionals. The dual pump arrangement allows for rapid lifting and the universal joint release mechanism provides precise control. The model passes the leading safety regulation standards so it can be used with confidence. The saddle does not have a rubber pad but the saddle which it is fitted with is a common castle type saddle and has served the purpose well over the years.
The Arcan CL2T is better than most low profile floor jacks with outstanding capabilities and with its lifting range of 24 inches makes it a leader in this range and definitely the better floor jack to buy.
Powerzone 380044 3 Tonne Aluminum and Steel Garage Jack
The Powerzone 380044 is the best 3-ton floor jack and not recommended to be used as a 5-ton floor jack. It is manufactured with an aluminum frame and a strong steel lifting arm for strength and durability. It is fitted with a safety valve to prevent overloading or over extending the piston for increased safety and preventing damage to the piston. The saddle is rubber padded to protect the vehicle frame with the handle having a protective sleeve to protect the paintwork. The rear wheels swivel and easy to position the jack even over rough surfaces. The jack has a quick lifting action and is easy to pump and will lift the vehicle to the maximum height in about 7 pumps only.
The Powerzone 380044 garage jack is the best floor jack which can also be used as a small truck floor jack with its 18 1/4 inch lift. It is sold at under $150,00 which is the best value for money a person can get.